2007 ENGINE PERFORMANCE Control System (MZI-3.5) - CX-9
3. Remove the intake manifold. (see INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [MZI-
3.5] .)
4. Disconnect the CHT sensor connector.
5. Remove the CHT sensor using the following tools.
Socket
3/8", 20mm, 6point
Ratchet handle and torque wrench
3/8" Drive
Fig. 35: Identifying CHT Sensor Connector
Courtesy of MAZDA MOTORS CORP.
6. Install in the reverse order of removal.
Tightening torque
10 N.m {102 kgf.cm, 89 in.lbf}
Fig. 36: Installing CHT Sensor
Courtesy of MAZDA MOTORS CORP.
2007 Mazda CX-9 Grand Touring