Mazda CX-9 Grand Touring 2007 Manual page 653

2007 ENGINE PERFORMANCE On-Board Diagnostic (MZI-3.5) - CX-9
Has FREEZE FRAME DATA
been recorded?
2 VERIFY RELATED REPAIR
INFORMATION AVAILABILITY
Verify related Service Bulletins
and/or on-line repair information
availability.
Is any related Service Bulletins
available?
3 INSPECT DRIVE BELT DAMAGED
Verify inspect the drive belt for
damage.
Is the drive belt normal?
4 INSPECT GENERATOR
TERMINAL FOR POOR
INSTALLATION
Turn the engine switch off.
Inspect generator terminal B for
looseness.
Are there any malfunction?
5 INSPECT GENERATOR CIRCUIT
FOR SHORT TO GROUND
Inspect for continuity between the
following terminal:
Generator terminal RC
(wiring harness-side) and
body ground.
Generator terminal LI
(wiring harness-side) and
body ground.
Are there continuity?
6 INSPECT BATTERY POSITIVE
TERMINAL FOR POOR
INSTALLATION
Turn the engine switch off.
Inspect the battery positive
terminal for looseness.
Is there any malfunction?
2007 Mazda CX-9 Grand Touring
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Record FREEZE FRAME DATA on the
repair order, then go to the next step.
Perform repair or diagnosis according to
the available Service Bulletins.
If the vehicle is not repaired, go to
the next step.
Go to the next step.
Go to the next step.
Replace the drive belt, then go to Step 10.
(see DRIVE BELT INSPECTION
[MZI-3.5] .)
Connect generator terminal B correctly,
then go to Step 10.
Go to the next step.
Repair or replace suspected part, then go to
Step 10.
Go to the next step.
Connect the battery positive terminal
correctly, then go to Step 10.
Go to the next step.