Mazda CX-9 Grand Touring 2007 Manual page 806

2007 ENGINE PERFORMANCE On-Board Diagnostic (MZI-3.5) - CX-9
and/or on-line repair information
availability.
Is any related Service Bulletins
available?
3 VERIFY RELATED PENDING
CODE OR STORED DTCs
Turn the ignition switch off then
to the ON position (Engine off).
Verify the related PENDING
CODE or stored DTCs using the
M-MDS.
4 INSPECT THE PERFORMANCE OF
THE PROCESSOR
Turn the ignition switch off.
Disconnect the battery and wait
for 1 min .
Connect the battery.
Start the engine and warm it up
completely.
Allow the engine idle to stabilize.
Access FTP PID.
Is the pressure equal to 0 kPa {0
2
kgf/cm , 2.0 psi} .
5 INSPECT FOR SELF-TEST DTC
P260F
Idle the engine 2 min .
Perform the KOEO/KOER self-
test.
Is DTC P260F present?
6 INSPECT PCM FOR THE LATEST
CALIBRATION
Program the PCM to the latest
calibration.
Turn the ignition switch to the ON
position (Engine running).
Idle the engine for 2 min .
Perform the KOEO/KOER self-
test.
2007 Mazda CX-9 Grand Touring
No
Yes
No
Yes
No
Yes
No
Yes
No
the next step.
Go to the next step.
Go to the appropriate DTC
troubleshooting.
(See DTC TABLE [MZI-3.5].)
Go to the next step
Go to Step 6.
Go to the next step.
Go to the next step.
Troubleshooting completed.
Go to the next step.
Troubleshooting completed.