Mazda CX-9 Grand Touring 2007 Manual page 635

2007 ENGINE PERFORMANCE On-Board Diagnostic (MZI-3.5) - CX-9
STEP
1 VERIFY FREEZE FRAME DATA
HAS BEEN RECORDED
Has FREEZE FRAME DATA
been recorded?
2 VERIFY RELATED REPAIR
INFORMATION AVAILABILITY
Verify related Service Bulletins
and/or on-line repair information
availability.
Is any related Service Bulletins
available?
3 VERIFY TROUBLESHOOTING OF
DTC P0607 HAS BEEN
COMPLETED
Verify that all disconnected
connectors are reconnected.
Turn the ignition switch to the ON
position (Engine off).
Clear the DTC from the PCM
memory using the M-MDS.
Perform "KOEO and KOER self-
test".
(See KOEO/KOER SELF TEST
[MZI-3.5].)
Retrieve DTCs using the M-MDS.
Is the PENDING CODE for this
DTC present?
4 VERIFY AFTER REPAIR
PROCEDURE
Perform the "AFTER REPAIR
PROCEDURE".
(See AFTER REPAIR
PROCEDURE [MZI-3.5].)
Are any DTCs present?
2007 Mazda CX-9 Grand Touring
INSPECTION ACTION
Yes Go to the next step.
No Record FREEZE FRAME DATA on the
repair order, then go to the next step.
Yes Perform repair or diagnosis according to
the available Service Bulletins.
If the vehicle is not repaired, go to
the next step.
No Perform PCM reprograming using the M-
MDS, then go to next step.
Yes Replace the PCM, then go to the next step.
(see PCM
REMOVAL/INSTALLATION [MZI-
3.5] .)
No Go to the next step.
Yes Go to the applicable DTC inspection.
(see DTC TABLE [MZI-3.5].)
No Troubleshooting completed.