Mazda CX-9 Grand Touring 2007 Manual page 596

2007 ENGINE PERFORMANCE On-Board Diagnostic (MZI-3.5) - CX-9
Has FREEZE FRAME DATA
been recorded?
2 VERIFY REPAIR INFORMATION
AVAILABILITY
Verify related Service Bulletins
availability.
Is any related Service Bulletins
available?
3 VERIFY RELATED PENDING
CODE OR STORED DTCs
Turn the ignition switch off then
to the ON position (Engine off).
Verify related pending code or
stored DTCs.
Is other DTCs present?
4 VERIFY STORED DTC IN
INSTRUMENT CLUSTER
Turn the ignition switch off then
to the ON position (Engine off).
Verify stored DTCs in instrument
cluster.
Is other DTCs present?
5 VERIFY TROUBLESHOOTING OF
DTC P0463 HAS BEEN
COMPLETED
Verify that all disconnected
connectors reconnected.
Clear the DTC from the PCM
memory using the M-MDS.
Perform the "KOEO/KOER self-
test".
(See KOEO/KOER SELF TEST
[MZI-3 5].)
Is the PENDING CODE for the
DTC present?
6 VERIFY AFTER REPAIR
PROCEDURE
2007 Mazda CX-9 Grand Touring
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
Record the FREEZE FRAME DATA on
the repair order, then go to the next step.
Perform repair or diagnosis according to
the available Service Bulletins. If the
vehicle is not repaired, go to the next step.
Go to the next step.
Go to the appropriate DTC
troubleshooting.
(See DTC TABLE [MZI-3.5].)
Go to the next step.
Go to the appropriate DTC inspection.
(see DTC TABLE [INSTRUMENT
CLUSTER] .)
Go to the next step.
Replace the PCM, then go to the next step.
(see PCM
REMOVAL/INSTALLATION [MZI-
3.5] .)
Go to the next step.
Go to the applicable DTC inspection.
(See DTC TABLE [MZI-3.5].)