Mazda CX-9 Grand Touring 2007 Manual page 163

CKP sensor terminal A and power supply
CKP sensor terminal A and body ground
CKP sensor terminal B and power supply
CKP sensor terminal B and body ground
CAMSHAFT POSITION (CMP) SENSOR REMOVAL/INSTALLATION [MZI-3.5]
1. Disconnect the negative battery cable.
2. Remove the battery.
3. Remove the following part for easier access.
Remove the resonance chamber and air cleaner assy. (see INTAKE-AIR SYSTEM
REMOVAL/INSTALLATION [MZI-3.5] .)
4. Disconnect the CMP sensor connector
5. Remove the CMP sensor.
NOTE:
6. Install in the reverse order of removal.
Fig. 20: View Of CMP Sensor With Torque Specifications
Courtesy of MAZDA MOTORS CORP.
CAMSHAFT POSITION (CMP) SENSOR INSPECTION [MZI-3.5]
NOTE:
Before performing the following inspection, make sure to follow the
procedure as indicated in the troubleshooting flowchart. (see HOW TO
USE THIS MANUAL .)
2007 Mazda CX-9 Grand Touring
2007 ENGINE PERFORMANCE Control System (MZI-3.5) - CX-9
Lubricate the CMP O-ring seal with clean engine oil.