Mazda CX-9 Grand Touring 2007 Manual page 261

Courtesy of MAZDA MOTORS CORP.
NO.1 ENGINE MOUNT REMOVAL NOTE
1. Remove the front under cover A and front under cover B. (see FRONT UNDER COVER
REMOVAL/INSTALLATION .)
2. Remove the transverse member. (see TRANSVERSE MEMBER REMOVAL/INSTALLATION .)
3. Remove the intermediate shaft installation bolt, and disconnect the steering shaft. (see STEERING
WHEEL AND COLUMN REMOVAL/INSTALLATION .)
4. Remove the No.1 engine mount bracket bolts A and B as shown.
Fig. 107: Identifying Engine Mount No. 1 Bracket Bolts A And B
Courtesy of MAZDA MOTORS CORP.
5. Remove the No.1 engine mount, No.1 engine mount bracket and the front crossmember as a single unit.
(see FRONT CROSSMEMBER REMOVAL/INSTALLATION .)
Fig. 108: Identifying No. 1 Engine Mount
Courtesy of MAZDA MOTORS CORP.
NO.3 ENGINE MOUNT RUBBER AND NO.4 ENGINE MOUNT BRACKET REMOVAL NOTE
1. Secure the engine and transaxle using an engine jack and attachment.
CAUTION:
2007 Mazda CX-9 Grand Touring
2007 ENGINE Mechanical (MZI-3.5) - CX-9
Remove the engine and transaxle carefully, holding it steady. If