Mazda CX-9 Grand Touring 2007 Manual page 264

surface does not adhere.
Fig. 114: Identifying No.4 Engine Mount Bracket Bolt And Nut Tightening Sequence
Courtesy of MAZDA MOTORS CORP.
2. Temporarily tighten the No.4 engine mount bracket in the order shown in the figure until the flange
surface firmly adheres.
Fig. 115: Identifying No.4 Engine Mount Bracket Bolt And Nut Tightening Sequence
Courtesy of MAZDA MOTORS CORP.
5. Install the No.1 engine mount, No.1 engine mount bracket and the front crossmember as a single unit.
(see FRONT CROSSMEMBER REMOVAL/INSTALLATION .)
Fig. 116: Identifying No.1 Engine Mount And Front Crossmember
2007 Mazda CX-9 Grand Touring
2007 ENGINE Mechanical (MZI-3.5) - CX-9