Mazda CX-9 Grand Touring 2007 Manual page 345

5. Using a straightedge, align the oil pan flush with the rear of the cylinder block at the two areas as shown.
Fig. 18: Aligning Oil Pan Flush With Rear Of Cylinder Block
Courtesy of MAZDA MOTORS CORP.
6. Tighten the bolts in the order shown in the figure.
Tightening torque
Bolt A: 18.5-21.5 N.m {1.89-2.19 kgf.m, 13.7-15.8 ft.lbf}
Bolt B: 8.5-11.5 N.m {87-117 kgf.cm, 76-101 in.lbf}
Fig. 19: Identifying Oil Pan Bolts With Tightning Sequence
Courtesy of MAZDA MOTORS CORP.
OIL PUMP REMOVAL/INSTALLATION [MZI-3.5]
WARNING:
2007 Mazda CX-9 Grand Touring
2007 ENGINE Lubrication (MZI-3.5) - CX-9
Fuel vapor Is hazardous. It can very easily ignite, causing serious
injury and damage. Always keep sparks and flames away from fuel.
Fuel line spills and leakage are dangerous. Fuel can ignite and cause
serious injures or death and damage. Fuel can also irritate skin and,
eyes. To prevent this, always complete the "Fuel Line Safety
Procedure". (see BEFORE REPAIR PROCEDURE [MZI-3.5] .)
Continuous exposure to USED engine oil has caused skin cancer in