Installation; Mounting Hardware - ETC Desire Series User Manual

Installation

Mounting Hardware

Four options are available for mounting Desire fixtures.
• Yoke with C-clamp
• Floor stand
• Canopy (D22)
• Track mount (D22)
Installing the Floor Stand
The floor standing yoke assembly replaces the included standard yoke so that the fixture can be placed
on a floor and tilted to the desired angle.
Main
yoke
Figure-2.1 Fixture with Floor Stand
1: Remove the yoke locking knob with the flat washer.
2: Remove the yoke bolts and flat washers that attach the yoke on each side of the fixture.
3: Attach the yoke and floor standing yoke assembly to the fixture with the two yoke bolts and two
flat washers.
4: Insert the yoke locking knob and flat washer and tighten.
Installing D22 Canopy and Track
For detailed installation information, see the
available for download at etcconnect.com.
Installation and User Interface
Yoke locking knob
Yoke bolt
Floor standing yoke
Desire Series D22 Installation Guide. ETC manuals are
17