ETC Desire Series User Manual page 34

HSI (Hue Saturation Intensity) and HSIC (Hue, Saturation, Intensity, Color
Temperature (White Point))
The HSI profile uses 4 channels of DMX input, corresponding to 16-bit hue (two channels: coarse and
fine), saturation, and intensity. The HSI profile makes Desire fixtures compatible with conventional HSI
console profiles while capitalizing on fixtures' expanded color capabilities. Channel 5 is for Strobe,
when enabled. Also see
HSIC is similar to HSI, except that it uses an additional 6th channel to control the color temperature of
the white point. White point is the color temperature of the white-light output when saturation is at
zero. The Red Shift function is automatically disabled in the HSIC profile. The white point address of the
D60 occupies a different address. For information about the D60 DMX footprint, refer to
Lustr+, Fire, Ice, Studio HD) D60X (Vivid, Lustr+, Studio HD)
Data Channel
1 Fixture address
2 Fixture address + 1
3 Fixture address + 2
4 Fixture address + 3
5 Fixture address + 4
6 Fixture address + 5
Note:
RGB
Effectively addresses all 7 colors via three channels of control. The RGB profile produces medium-
quality color crossfades. It makes the Desire fixtures compatible with conventional RGB console profiles
while maintaining enhanced color production from the fixture. Also see
Data Channel
1 Fixture address
2 Fixture address + 1
3 Fixture address + 2
4 Fixture address + 3
5 Fixture address + 4
Note:
28
Color Matching
Control
Hue coarse
Hue fine
Saturation
Intensity
Strobe
White point
The HSI profile is optimized for maximum brightness at all settings.
At some settings, small changes in hue and saturation may produce unexpected
jumps in brightness.
Shifts in brightness may be perceived during fades across hue, saturation, or both in
cues and presets.
Control
Red
Green
Blue
—
Strobe
The RGB profile is optimized for maximum brightness at all settings. Sometimes small
changes in RGB values may produce unexpected jumps in brightness.
Shifts in brightness may be perceived during color crossfades in cues and presets.
page 30
on .
on page 33
Value
0 to 65535
0 to 255
Value
0 to 255
—
0 to 255
D60 (Vivid,
.
Function
Hue 0
Saturation 0 to 100%
Intensity 0 to 100%
Variable strobe control
Color temperature 2000–
8375K
Color Matching page 30
on
Function
Intensity 0 to 100%
—
Variable strobe control
Desire Series v1.8.0 User Manual
.