Connect Using Gadget Ii - ETC Desire Series User Manual

Connect using Gadget II

Gadget II provides a connection from a PC to your lighting system's DMX/RDM devices. Gadget II
provides DMX control of level output, configuration, and monitoring for RDM devices including
fixtures, dimmers, and more. You can also upgrade software for most DMX-based ETC products using
UpdaterAtor or Net3 Concert software.
Prior to connecting Gadget II, start the RDM configuration tool and apply power to the fixtures.
For detailed information, see the
1: Connect the USB cable to the PC and the mini USB to Gadget II.
2: Connect the DMX cable to Gadget II.
3: Connect the other end of the DMX cable to the DMX/RDM network jack.
Figure-4.48 Gadget II architecture
Connect using a DMX/RDM Gateway
Also see
For information on RDM commands, see
78
Gadget II USB to DMX/RDM Interface Setup Guide.
Computer with
Net3 Concert,
-OR-
UpdaterAtor,
or ETCnomad
USB cable
Gadget II
RDM Commands
ETCnomad Puck
page 79
on .
page 92
on .
Desire Series v1.8.0 User Manual