Hang or mount the fixture. Attach safety cable. Insert secondary lens with smooth side out, if desired. Insert additional accessories, if desired (top hat, egg crate, etc.). WARNING: Use only hardware rated for total weight of fixture and accessories. The safety cable (or other approved safety device) must be securely attached to the safety cable loop before loosening the clamp.
WARNING: • Do not link more than nine fixtures when using Power Thru (non-dimming, 100 to 240 VAC, 50/60 Hz). Power Thru is not available on all Desire Series fixtures. • Up to 32 devices can be daisy-chained together per data run.
DMX/RDM gateway. After the fixtures are configured, Gadget II or the gateway can be disconnected and a DMX or RDM control device can be connected to the network for continued operation. For more Desire Series by ETC D22, D40, D40XT, D60, D60X information on configuring fixtures using RDM, see the User Manual .
ETC Quick Guide Desire Fixture Series Quick Setups D40XT, D40, D60, and D60X: Vivid, Lustr+, Fire, Ice, Studio HD D22: Lustr+, Studio HD Quick Setup Profile Features Recommended Use • Standard dimming curve Factory default: For general • Regulated output for color...
ETC Quick Guide Desire Fixture Series DMX Input Channel Profiles D40, D40XT: Vivid, Lustr+, Fire, Ice, Studio HD D22: Lustr+, Studio HD Channel Assignments Notes Profile Channels Vivid, Lustr+ Studio HD 1 - Red 1 - Red 2 - Orange...
Page 7
ETC Quick Guide Desire Fixture Series Additional profile options Profile Channel Assignments Notes Option 1 - Hue (coarse) Adds seven additional color control channels to RGB, HSI, 2 - Hue (fine) HSIC, and Studio input profile settings. For example, HSI 3 - Saturation with ‘Plus 7’...
Page 8
ETC Quick Guide Desire Fixture Series D60 & D60X: Vivid, Lustr+, Fire, Ice, Studio HD (no Fire or Ice in D60X) Channel Assignments Notes Profile Channels 1 - Red 2 - Orange (White if Lustr+) 3 - Amber 4 - Green...
Page 9
ETC Quick Guide Desire Fixture Series Additional profile options Profile Channel Assignments Notes Option 1 - Hue (coarse) 2 - Hue (fine) Adds seven additional color control channels to RGB, HSI, 3 - Saturation and HSIC input profile settings. For example, HSI with ‘Plus 4 - Intensity 7’...
Need help?
Do you have a question about the Desire Series and is the answer not in the manual?
Questions and answers