ETC Desire Series User Manual page 56

Fan Control (D60 only)
Fan Control adds another DMX channel of control when set to DMX. Alternate settings are Slow, Fast,
and Automatic. For more information, see
1: On the DMX Settings menu, scroll to Fan.
DMX Start Address:
DMX Profile:
Strobe Mode:
Data Loss:
Fan Mode:
Figure-4.7 Setting the Fan Mode on the DMX Settings Menu
2: Press [
3: Press [
Data Loss
Data Loss is what happens to the fixture's output when the external control signal (either DMX or data
from the Master fixture in a Master/Slave configuration) is lost. The choices are as follows:
I n s t a n t
As soon as the control signal is lost, the fixture shuts off output and the LED array goes black.
H L L - 2 M i n
Hold last look for 2 minutes. The fixture retains its last setting for 2 minutes after the control signal is
lost, after which it shuts off output.
Cycling power to the fixture before the 2 minutes have passed will clear the last look and the LEDs will
remain off until control signal is restored.
H L L - 4 e v e r
Hold last look forever. After data is lost, the fixture maintains its last look until power is removed from
the fixture or control signal is restored. The last look will not be restored after power has been cycled.
1: On the DMX Settings menu, scroll to Data Loss.
DMX Start Address:
DMX Profile:
Strobe:
Data
Plus Seven:
DMX Profile:
Figure-4.8 Setting the Data Loss Type on the DMX Settings Menu
2: Press [
3: Press [
50
DMX Settings
Instant
6/15 Fan
] to scroll through the available options.
] or [ ] to commit the option.
DMX Settings
Loss: Instant
6 chan
2/15 Hue Fine
] to toggle through the three options.
] or [ ] to commit the option.
Fan Control (D60)
101
Direct
On
Auto
101
HSIC
On
On
page 31
on .
Desire Series v1.8.0 User Manual