ETC Desire Series User Manual page 64

Presets (Studio Daylight and Studio Tungsten)
The Desire Studio Daylight and Studio Tungsten fixtures come with 24 available slots for Presets. Only
one Preset can be active at a time. You can activate any of the Presets and customize each one. Studio
Daylight and Studio Tungsten fixtures have Presets that can define both Intensity and Strobe values.
There are no default Presets that come pre-configured from the factory.
Focus:
Presets
Sequences
Quick Color
Preset 1 is Active
No Sequence is Active
Figure-4.16 Selecting Presets on the Presets and Sequences Menu
1: On the Presets and Sequences menu, scroll to Presets.
2: Press [
3: With Preset selected, press [
4: Press [
5: Press [
6: Press [
7: Press [
The action changes to Active and an asterisk (*) displays in front of the preset number.
F a d e T i m e
Fade time is the length of time the fixture takes to crossfade from the previous setting to the Preset.
The format is MM:SS. The default is 2 seconds.
1: On the Presets menu, scroll to Fade Time and press [
Preset:
Status:
Fade
Delay Time:
Edit Color
Copy to Other Fixture
Save DMX as Preset
Figure-4.17 Selecting Fade Time on the Presets Menu
2: Press [
3: Press [
4: Press [
5: Press [
58
Presets and Sequences
].
] or [ ] to set the desired preset number.
].
] to select Status.
] to activate the Preset.
Presets
Active
Time: 00:02
00:00
] or [ ] to set the desired time in minutes.
].
] or [ ] to set the desired time in seconds.
].
Off
].
* 23
Presets
Preset:
Status:
Fade Time:
Delay Time:
Edit
Copy to Other Fixture
Save DMX as Preset
].
Desire Series v1.8.0 User Manual
* 23
Active
00:02
00:00