ETC Desire Series User Manual page 77

BLght time out
You can change the length of time the LCD backlight remains on after a UI button has been pressed.
The options are 30 seconds, 1 minute, 5 minutes, 15 minutes, and never. The default is 1 minute.
1: With BLght time out selected, press [
Backlight:
BLght time
Language:
Status Indicators:
OverTemp:
Restore Defaults
Figure-4.40 Setting Backlight Timeout
2: Continue to press [
3: Press [
Language
The screen language is English.
Backlight:
BLght time out:
Language:
Status Indicators:
OverTemp:
Restore Defaults
Figure-4.41 Screen Language Set to English
Status Indicators
You can turn the status indicators on or off. The default is on.
1: With Status Indicators selected, press [
Backlight:
BLght time out:
Language:
Status
OverTemp:
Restore Defaults
Figure-4.42 Setting the Status Indicator Display
2: Continue to press [
3: Press [
CAUTION:
Operation
Local Settings
out: 1 min
English
Visible
] until the desired time is indicated.
] or [ ] to commit the option.
Local Settings
1 min
English
Visible
Local Settings
1 min
English
Indicators:
Visible
] to toggle between ON and OFF.
] or [ ] to commit the option.
Although it may be desirable in some applications to eliminate all stray light
from the back of the fixture, turning the Status Indicators OFF prevents them
from communicating potentially critical information. Use discretion when
selecting the OFF setting.
].
100%
Off
100%
Off
].
100%
Off
71