ETC Desire Series User Manual page 68

R a t e
Rate is the execution of the Presets' Fade Times and Delay Times within the Sequence, relative to their
settings within the actual Presets. The available Rate range is 2 to 500%. The default is 100%.
A Rate of 100% represents running the Sequence with timing exactly as specified within the Presets.
A Rate above 100% represents running the Sequence with faster timing than specified within the
Presets. For example, with a Rate of 200%, a Preset with a Fade Time of 6 seconds would actually be
run within the Sequence in only 3 seconds.
A Rate below 100% represents running the Sequence with slower timing than specified within the
Presets. For example, with a Rate of 50%, a Preset with a Fade Time of 6 seconds would actually be run
within the Sequence in 12 seconds.
Any change to the Rate is updated live in the fixture memory. Pressing [
to Rate.
1: On the Sequences menu, scroll to Rate and press [
Sequence:
Action:
Rate:
Step:
Preset:
Link Time:
Copy to Other Fixture
Figure-4.24 Selecting Rate on the Sequences Menu
2: Press [
3: Press [
4: Press [
S t e p
Step refers to the number of the current step in the sequence. In our example, you select step 1. After
setting the Preset and Link time, return to Step and select step 2. Repeat this process until you have
entered all the steps in the sequence.
Any change to Step is updated live in the fixture memory. Pressing [
Step.
1: On the Sequences menu, scroll to Step and press [
Sequence:
Action:
Rate:
Step:
Preset:
Link Time:
Copy to Other Fixture
Figure-4.25 Selecting Step on the Sequences Menu
2: Press [
3: Press [
4: Press [
62
Sequences
Not Active
00:02
] or [ ] to set the desired percent.
].
] to scroll to Step.
Sequences
Not Active
100%
00:02
] or [ ] to set the desired Step number.
].
] to scroll to Preset.
].
* 3
100%
01
1
].
*3
01
1
] does not undo a change
] does not undo a change to
Desire Series v1.8.0 User Manual