ETC Desire Series User Manual page 65

D e l a y T i m e
Delay time is the length of time the fixture waits on the previous setting before initiating the crossfade
to the Preset. The default is 0 seconds.
1: On the Presets menu, scroll to Delay Time and press [
Preset:
Status:
Fade Time:
Delay
Edit Color
Copy to Other Fixture
Save DMX as Preset
Figure-4.18 Selecting Delay Time on the Presets Menu
2: Press [
3: Press [
4: Press [
5: Press [
E d i t ( V i v i d , L u s t r + , F i r e a n d I c e , S t u d i o H D )
Use Edit to change the overall hue, saturation, intensity, and strobe settings of the Preset. You can
change the predefined color mixes for the Preset. Refer to the table in
Ice, Studio HD)
To keep your changes, be sure to select Save Changes and then press
[ ] at any time.
If the Preset is currently active, the changes made on the Preset Color Edit screen update to the fixture
output immediately.
1: On the Presets menu, scroll to Edit Color and press [
Color:
Hue Course:
Hue Fine:
Sat:
Int:
Strobe:
Save Changes
Figure-4.19 Edit Preset Screen (Vivid, Lustr+, Fire and Ice, Studio HD)
2: With Color selected, press [
3: Press [
4: Alternatively, to edit the predefined color mix, scroll to any of the parameters on the screen and
press [
5: Press [
6: Press [
7: Do one of the following:
• Scroll to Save Changes and press [
• Press [
Operation
Presets
Active
00:02
Time: 00:00
] or [ ] to set the desired time in minutes.
].
] or [ ] to set the desired time in seconds.
].
page 57
on .
Preset 23 Edit
].
] or [ ] to set the desired predefined color mix.
].
] or [ ] to change the values.
].
] to exit the screen without saving the changes.
* 23
White
0
0
0
100%
255
].
].
Presets (Vivid, Lustr+, Fire and
[ ].
To discard changes press
].
59