Status (Home) Screens - ETC Desire Series User Manual

Status (Home) Screens

The status (home) screens display when you press [
The home screens display the status of multiple fixture settings. These may or may not include:
• Quick Setup
• Input settings
• DMX address
• LED settings
• Preset or Sequence that may be active
• Master or Slave status, when applicable
• Diagnostic messages
• DMX signal status
• Software version
Most of the settings can be adjusted either on the home screen or within a short series of menus.
When a quick setup is selected, the settings of the setup are displayed on the home screen.
For more information about status screens, see
Figure-3.5 Examples of Status Screens
Display Title
A menu's title appears in the first row of every display for easy navigation.
Input Settings
Displays the parameters for the Quick Setup that is active. For more information, see
Displays page 45
on
DMX Address
Indicates the DMX address when the fixture is receiving DMX. For more information, see
Address page 46
on
Basic Menu Navigation
HSI Reg Incd RS ––
001
Error!
Power Budgeting 75%
11/15 +7 Amber Adj
8Ch Reg Stnd RS Strb
Master
Sequence 5 Active
Step 4: Preset 3
Error!
Overtemp Activated
3/15 Saturation
.
.
] or when there is no activity for a specific time.
Home Screen Displays
on
Display title
Input settings
DMX address
System message area
Status bar
page 45
.
Home Screen
DMX Start
43