ETC Desire Series User Manual page 80

Operation From Home Status Screen (Studio Stand-alone)
When operating without an external control signal, the quality of the white light can be adjusted
immediately and directly via menu options on the home screen.
When fixtures are connected together and there is no external control signal, all adjustments that you
make on one fixture are automatically made on the connected fixtures.
Intensity:
WhitePoint:
Tint:
Figure-4.45 Studio Status Home Screen (Vivid, Lustr+, Fire and Ice, Studio HD)
• To adjust the Intensity, select it in the menu and press [
0 to 100%.
• To immediately set the Intensity to 0, press the [
previously-set Intensity.
• To adjust the White Point, select it in the menu and press [
is 2700 to 6500K.
• To adjust the Tint, select it in the menu and press [
increases magenta and [
• To return to the Main Menu, press [
• To return to the Studio status screen from the Main Menu, press [
74
STUDIO MODE
100%
3200K
40%
System OK
4/5 Intensity
] increases green.
] and then [
] button. Pressing it again will return it to the
] and then [
] and then [
].
] or [ ]. The range is
] or [ ] . The range
] or [ ]. Pressing [
].
Desire Series v1.8.0 User Manual
]