Quick Color (Vivid, Lustr+, Fire and Ice, Studio HD)
Quick Color allows you to easily select a color and its intensity from a predefined menu. This feature
overrides any presets or sequences previously selected and is only available when there is no external
DMX signal to the fixture. For a list of available colors, see the table on
Note:
1: Press the [
2: Within the Presets and Sequences screen, scroll to Quick Color.
3: Press [
Focus:
Presets
Sequences
Quick Color
Preset 1 is Active
No Sequence is Active
Figure-4.30 Selecting Quick Color on the Presets and Sequences Menu
4: Scroll to Color and press [
5: Press [
6: Press [
7: Scroll to Intensity and press [
8: Press and hold [
9: Press [
• To set the Intensity to 0, press the [
its previously set Intensity.
• If power to the fixture is lost while in Quick Color mode, the fixture will return to the Quick
Color menu once power is restored.
Operation
Exiting the Quick Color menu will return the fixture to the state it was in before
entering the menu.
] to quickly access the Presets and Sequences screen.
].
Presets and Sequences
].
] or [
] to select the desired color.
] to commit the selection.
] or [
] to adjust the fixture's intensity.
] to commit the selection.
Off
].
]. Pressing [
page 57
.
Quick Color
Intensity:
Color:
] a second time will return the fixture to
100%
–––
65