Checking And Replacing Product Parts - Metrohm OMNIS Sample Robot Pick&Place Product Manual

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
8.4

Checking and replacing product parts

Attach the slide from above onto the collection tray.
NOTICE
Water or ethanol can be used as a cleaning medium.
To guarantee the flawless functioning and operation of the products as
well as of their functional units, all parts must be regularly checked and
replaced if needed.
NOTICE
The following points must always be observed:
The product is switched off.
￭
The product is disconnected from the power grid.
￭
In the following paragraphs you will find an explanation of how the prod-
uct parts can be checked individually and what has to be taken into
account. The procedure for replacing the parts is then described step-by-
step where necessary.
WARNING
Electric shock from electrical potential
Risk of injury by touching live components or through moisture on
live parts.
Never open the housing of the product.
￭
Protect live parts (e.g. power supply unit, power cord, connection
￭
sockets) against moisture.
If you suspect that moisture has gotten into the product, discon-
￭
nect the product from the energy supply. Then notify Metrohm
Service.
Only personnel who have been issued Metrohm qualification may
￭
perform service and repair work on electrical and electronic com-
ponents.
Maintenance
￭￭￭￭￭￭￭￭
67