Danger From High Temperatures; Responsibility Of The Operator; Personnel Requirement - Metrohm OMNIS Sample Robot Pick&Place Product Manual

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
2.5.8

Danger from high temperatures

2.6

Responsibility of the operator

2.7

Personnel requirement

WARNING
Risk of injury from high temperatures
Burns from hot surfaces and/or hot liquids.
Install and use the protective devices enclosed with the product.
￭
Wear protective gloves while working in hot areas.
￭
Clean up spilled liquids and solids immediately.
￭
Eliminate defects or damage which impair operating safety without
￭
delay.
Eliminate malfunctions which could impair safety without delay.
￭
The rules, regulations and instructions listed in the present document
￭
are not the only valid ones. Comply with the applicable statutory rules,
government agency directives and regulations.
Unauthorized modification of the products excludes any and all liability
￭
on the part of the manufacturer for any damage resulting from this as
well as for any consequential damage. No modifications, attachments
or conversions which could impair safety may be carried out on the
products without the approval of the manufacturer.
Spare parts must meet the technical requirements established by the
￭
manufacturer. Original spare parts always meet these requirements.
Personnel must be familiar with this safety-relevant information and it
￭
must be available for consultation at all times.
Only qualified personnel may operate the present product.
Qualified personnel are people authorized by the safety responsible to
carry out the necessary operations. They are capable of recognizing and
avoiding possible dangers. These people are qualified due to their profes-
sional training, experience and/or instruction. They know the relevant
standards, laws, provisions, accident prevention regulations and the com-
pany conditions.
Safety
￭￭￭￭￭￭￭￭
13