Operation And Control; Operation; Switching The Omnis Sample Robot On And Off - Metrohm OMNIS Sample Robot Pick&Place Product Manual

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭

7 Operation and control

7.1

Operation

7.2

Switching the OMNIS sample robot on and off

NOTICE
Operating via the control software
The product can be operated using the commands of the control
software.
Additional information can be found in the software help .
Switching the OMNIS sample robot on and off
The on/off switch
robot.
1 Switching the OMNIS sample robot on
Press the on/off switch
signal is heard.
The status display (see "Indicators", page 32) is lit up yellow until it is
paired with the OMNIS Software.
As soon as the sample robot is paired with the OMNIS Software, the
color of the status display switches to green and the sample robot is
ready for operation.
2 Switching the OMNIS sample robot off
Press the on/off switch
signal is heard.
The status display goes out and the sample robot is switched off.
is located on the main module of the sample
for one second until the single acoustic
for one second until the single acoustic
Operation and control
￭￭￭￭￭￭￭￭
53