About The Documentation; Additional Information; Accessories - Metrohm OMNIS Sample Robot Pick&Place Product Manual

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1.7

About the documentation

1.8

Additional information

1.8.1

Accessories

NOTICE
Please read through this documentation carefully before putting the
product into operation.
The documentation contains important information and warnings
which you must follow in order to ensure safe operation of the prod-
uct.
Symbols and conventions
The following icons and formatting may appear in this documentation:
Cross-reference to figure legend
The first number refers to the figure number, the sec-
ond to the product part in the figure.
Instruction step
Carry out these steps in the sequence shown.
Method Designations for names of parameters, menu items,
tabs and dialog windows in the software.
File ▶ New
Menu or menu item
Work area / Menu paths in order to arrive at a particular position
Properties in the software.
[Next] Button or key
Additional information concerning the topic can be found:
in the Software Help
￭
in the Metrohm information portal on the Internet
￭
guide.metrohm.com
Up-to-date information on the scope of delivery and optional accessories
for your product can be found on the Internet. You can download this
information using the article number as follows:
Overview
https://
￭￭￭￭￭￭￭￭
5