Metrohm OMNIS Sample Robot Pick&Place Product Manual page 65

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
2 Pushing in the sample rack
Figure 32 Pushing in the sample rack
Push the sample rack towards the front until it is firmly seated on the
rack holder (30-2).
NOTICE
A brief acoustic signal will sound as soon as the sample rack is
seated correctly on the rack base and the rack holder.
Removing the sample rack
1 Grip the sample rack on the transport handles with both hands and
remove it towards the top.
NOTICE
A brief acoustic signal will sound as soon as the sample rack has
been removed from the rack base and the rack holder.
Operation and control
￭￭￭￭￭￭￭￭
57