Xilinx Kintex UltraScale FPGA KCU1250 Getting Started Manual page 32

9. From the Project Manager window, in the Sources window, right-click the IBERT IP and
select Open IP Example Design
OK, and the example design launches in a new Vivado Design Suite window.
X-Ref Target - Figure 2-8
KCU1250 IBERT Getting Started Guide
UG1061 (v2017.4) December 20, 2017
(Figure 2-8). Specify a location to save the design, click
Figure 2-8: Open IP Example Design
www.xilinx.com
Chapter 2: Creating the GTH IBERT Core
Send Feedback
32