Xilinx Kintex UltraScale FPGA KCU1250 Getting Started Manual page 29

6. A Customize IP window opens. In the Protocol Definition tab, set the LineRate (Gb/s)
to 12.5 Gbps. Change Refclk (MHz) to 125. Keep defaults for other fields
X-Ref Target - Figure 2-5
KCU1250 IBERT Getting Started Guide
UG1061 (v2017.4) December 20, 2017
Figure 2-5: Customize IP – Protocol Definition
www.xilinx.com
Chapter 2: Creating the GTH IBERT Core
Send Feedback
(Figure 2-5).
29