Xilinx Kintex UltraScale FPGA KCU1250 Getting Started Manual page 19

5. In the Select Hardware Target window, the xilinx_tcf cable appears under Hardware
Targets, and the JTAG chain contents of the selected cable appear under Hardware
Devices (Figure
Frequency at the default value (15 MHz). Click Next.
X-Ref Target - Figure 1-16
6. In the Open Hardware Target Summary window, click Finish. The wizard closes and
the Vivado Design Suite opens the hardware target.
To view the GTH transceiver operation, click Layout > Serial I/O Analyzer. From the top
of the Hardware Manager window, select Auto-Detect Links to display all available
links automatically. Links can also be created manually in the Links window by
right-clicking and selecting Create Links or by clicking the Create Links button
(Figure 1-17).
KCU1250 IBERT Getting Started Guide
UG1061 (v2017.4) December 20, 2017
1-16). Select the xilinx_tcf_Digilent target and keep the JTAG Clock
Figure 1-16: Select Hardware Target
www.xilinx.com
Chapter 1: KCU1250 IBERT Getting Started Guide
19
Send Feedback