If links are created manually, the Create Links window is displayed. The options in this
window are used to link any TX GT to any RX GT. To create links, select the TX GT and RX
GT from the two lists, then click the Add (+) button. For this project, connect the
following links
MGT_X0Y0/TX (xcku040_0/Quad_224) to MGT_X0Y0/RX (xcku040_0/Quad_224)
°
MGT_X0Y1/TX (xcku040_0/Quad_224) to MGT_X0Y1/RX (xcku040_0/Quad_224)
°
MGT_X0Y2 /TX (xcku040_0/Quad_224) to MGT_X0Y2/RX (xcku040_0/Quad_224)
°
MGT_X0Y3/TX (xcku040_0/Quad_224) to MGT_X0Y3/RX (xcku040_0/Quad_224)
°
X-Ref Target - Figure 1-18
KCU1250 IBERT Getting Started Guide
UG1061 (v2017.4) December 20, 2017
(Figure
1-18):
Figure 1-18: Create Links Window
www.xilinx.com
Chapter 1: KCU1250 IBERT Getting Started Guide
21
Send Feedback