Logging Options - Fortinet FortiGate Series Administration Manual

Firewall Protection Profile

Logging options

FortiGate Version 4.0 MR1 Administration Guide
01-410-89802-20090903
http://docs.fortinet.com/ • Feedback
Figure 290: Protection Profile Application Control options
Application Select the check box and then specify the application control black/white list
to add to the protection profile. For more information, see
Black/White List
application control black/white list" on page
Figure 291: Protection Profile Replacement Message options
Figure 292: Adding an MMS protection profile to a protection profile
You can enable logging options in a protection profile to write event log messages when
the options that you have enabled in this protection profile perform an action. For
example, if you enable antivirus protection you could also enable the antivirus protection
profile logging options to write an event log message every time a virus is detected by this
protection profile.
For more information about enabling and configuring event logs, see
logging" on page 717.
To configure Logging options, go to Firewall > Protection Profile. Select Create New to
add a protection profile, or the Edit icon beside an existing protection profile. Then select
the Expand Arrow beside Logging, enter the information as described below, and select
OK.
Configuring a protection profile
"Creating a new
605.
"Configuring Event
503