Fortinet FortiGate Series Administration Manual page 488

Configuring a protection profile
488
To configure protocol recognition options, go to Firewall > Protection Profile. Select Create
New to add a protection profile, or the Edit icon beside an existing protection profile. Then
select the Expand Arrow beside Protocol Recognition, enter the information as described
below, and select OK.
Figure 277: Protection profile Protocol Recognition options (SSL content scanning and
inspection)
Figure 278: Protection profile Protocol Recognition options
Note: If your FortiGate unit supports SSL content scanning and inspection, you must set
HTTPS Content Filtering Mode to Deep Scan before you can configure additional HTTPS
content scanning protection profile options.
Firewall Protection Profile
Add or
Remove
Port
Numbers
Edit Monitored
Ports
Add or
Remove
Port
Numbers
Edit Monitored
Ports
FortiGate Version 4.0 MR1 Administration Guide
01-410-89802-20090903
http://docs.fortinet.com/ • Feedback