Changing System Information; Configuring System Time - Fortinet FortiGate Series Administration Manual

System Status

Changing system information

Configuring system time

FortiGate Version 4.0 MR1 Administration Guide
01-410-89802-20090903
http://docs.fortinet.com/ • Feedback
Figure 43: Traffic History
Interface The interface that is being monitored .
kbit/s The units of the traffic graph. The scale varies based on traffic levels to
allow it to show traffic levels no matter how little or how much traffic there is.
Last 60 Minutes Three graphs showing the traffic monitored on this interface of the FortiGate
unit over different periods of time.
Last 24 Hours
Certain trends may be easier to spot in one graph over the others.
Last 30 Days
Traffic In The traffic entering the FortiGate unit on this interface is indicated with a
thin red line.
Traffic Out The traffic leaving the FortiGate unit on this interface is indicated with a dark
green line, filled in with light green.
FortiGate administrators whose admin profiles permit write access to system configuration
can change the system time, host name and the operation mode for the VDOM.
1 Go to System > Status > Dashboard.
2 In the System Information section, select Change on the System Time line.
3 Select the time zone and then either set the date and time manually or configure
synchronization with an NTP server.
Figure 44: Time Settings
Changing system information
Interface being
monitored
125