Fortinet FortiGate Series Administration Manual page 234

Hide thumbs Also See for FortiGate Series:

Table of Contents

If HA is already enabled, go to System > Config > HA to display the cluster members list.

Select Edit for the FortiGate unit with Role of master (also called the primary unit). When

you edit the HA configuration of the primary unit, all changes are synchronized to the other

cluster units.

Figure 106: FortiGate-3810A unit HA configuration

You can configure HA options for a FortiGate unit with virtual domains (VDOMs) enabled

by logging into the web-based manager as the global admin administrator and then going

to System > Config > HA.

Note: If your FortiGate cluster uses virtual domains, you are configuring HA virtual

clustering. Most virtual cluster HA options are the same as normal HA options. However,

virtual clusters include VDOM partitioning options. Other differences between configuration

options for regular HA and for virtual clustering HA are described below and in the

FortiGate HA Overview

FortiGate HA

FortiGate Version 4.0 MR1 Administration Guide

System Config

01-410-89802-20090903

http://docs.fortinet.com/