Adding And Configuring Dlp Compound Rules - Fortinet FortiGate Series Administration Manual

DLP Compound Rules

Adding and configuring DLP compound rules

600
Figure 369: DLP compound rule list
Create New
Name
Comments
DLP sensors
Delete and Edit icons
Go to UTM > Data Leak Prevention > Compound. To add a new compound rule, select
Create New. To edit an existing compound rule, select the edit icon of the compound rule
to be changed.
Figure 370: DLP compound rule
Add Rule
Name
Comments
Protocol
Select Create New to add a new compound rule.
The compound rule name.
The optional description of the compound rule.
If the compound rule is used in any sensors, the sensor names are
listed here.
Delete or edit a compound rule.
If a compound rule is used in a sensor, the delete icon will not be
available. Remove the compound rule from the sensor and then delete
it.
Delete Rule
The compound rule name.
An optional description of the compound rule.
Select the type of content traffic that the DLP compound rule applies
to. The rules that you can add to the compound rule vary depending
on the protocol that you select. You can select the following protocols:
Email, HTTP, FTP, NNTP, and Instant Messaging.
FortiGate Version 4.0 MR1 Administration Guide
Data Leak Prevention
Delete
Edit
01-410-89802-20090903
http://docs.fortinet.com/ • Feedback