Fortinet FortiGate Series Administration Manual page 48

Dynamic routing for IPv6 traffic
48
config network6
edit <network_id>
set backdoor {enable | disable}
set prefix6 <address_ipv6mask>
set route-map <routemap-name_str>
end
config redistribute6
Variable
config aggregate-address6 Variables
edit <aggr_addr_id>
as-set {enable | disable}
prefix6 <address_ipv6mask> Set an aggregate prefix.
summary-only
{enable | disable}
config neighbor Additional Variables
activate6
{enable | disable}
allowas-in6
<max_num_AS_integer>
allowas-in-enable6
{enable | disable}
attribute-unchanged6
[as-path] [med] [next-hop]
capability-default-
originate6
{enable | disable}
capability-graceful-
restart6
{enable | disable}
What's new in FortiOS Version 4.0 MR1
Description
Enter an ID number for the entry. The number
must be an integer.
Enable or disable the generation of an
unordered list of AS numbers to include in the
path information. When as-set is enabled, a
set-atomic-aggregate
have to be specified.
Enable or disable the advertising of aggregate
routes only (the advertising of specific routes is
suppressed).
Enable or disable the address family for the
BGP neighbor.
This keyword is available when
allowas-in-enable6 is set to enable.
Set the maximum number of occurrences your
AS number is allowed in.
Enable or disable the readvertising of all
prefixes containing duplicate AS numbers. Set
the amount of time that must expire before
readvertising through the allowas-in
keyword.
Propagate unchanged BGP attributes to the
IPv6 BGP neighbor.
• To advertise unchanged AS_PATH
attributes, select as-path.
• To advertise unchanged MULTI_EXIT_DISC
attributes, select med.
• To advertise the IP address of the next-hop
router interface (even when the address has
not changed), select next-hop.
• An empty set is a supported value.
Enable or disable the advertising of the default
route to IPv6 BGP neighbors.
Enable or disable the advertising of graceful-
restart capability to IPv6 BGP neighbors.
FortiGate Version 4.0 MR1 Administration Guide
Default
No default.
disable
value does not
::/0
disable
enable
unset
disable
Empty set.
disable
disable
01-410-89802-20090903
http://docs.fortinet.com/ • Feedback