Conventions; Ip Addresses; Notes, Tips And Cautions - Fortinet FortiGate Series Administration Manual

Hide thumbs Also See for FortiGate Series:

Table of Contents

Conventions

reconfigure basic items that were configured during installation

configure advanced features

This document does not cover all commands for the command line interface (CLI). For

information on the CLI, see the

This document is intended for administrators, not end users.

Fortinet technical documentation uses the conventions described below.

To avoid publication of public IP addresses that belong to Fortinet or any other

organization, the IP addresses used in Fortinet technical documentation are fictional and

follow the documentation guidelines specific to Fortinet. The addresses used are from the

private IP address ranges defined in RFC 1918: Address Allocation for Private Internets,

available at http://ietf.org/rfc/rfc1918.txt?number-1918.

Fortinet technical documentation uses the following guidance and styles for notes, tips

and cautions.

Tip: Highlights useful additional information, often tailored to your workplace activity.

Note: Also presents useful information, but usually focused on an alternative, optional

method, such as a shortcut, to perform a step.

Caution: Warns you about commands or procedures that could have unexpected or

undesirable results including loss of data or damage to equipment.

FortiGate CLI

FortiGate Version 4.0 MR1 Administration Guide

Introduction

01-410-89802-20090903

http://docs.fortinet.com/