Fortinet FortiGate Series Administration Manual page 50

Dynamic routing for IPv6 traffic
50
Variable
prefix-list-in6
<prefix-list-name_str>
prefix-list-out6
<prefix-list-name_str>
remove-private-as6
{enable | disable}
route-map-in6
<routemap-name_str>
route-map-out6
<routemap-name_str>
route-reflector-client6
{enable | disable}
route-server-client6
{enable | disable}
send-community6 {both |
disable | extended |
standard}
soft-reconfiguration6
{enable | disable}
unsuppress-map6
<route-map-name_str>
config network6 Variables
edit <network_id>
What's new in FortiOS Version 4.0 MR1
Description
Limit route updates from an IPv6 BGP neighbor
based on the Network Layer Reachability
Information (NLRI) in the specified prefix list.
The prefix list defines the NLRI prefix and length
advertised in a route. You must create the prefix
list before it can be selected here. See
prefix-list6" on page 56.
Limit route updates to an IPv6 BGP neighbor
based on the NLRI in the specified prefix list.
The prefix list defines the NLRI prefix and length
advertised in a route. You must create the prefix
list before it can be selected here. See
prefix-list6" on page 56.
Remove the private AS numbers from outbound
updates to the IPv6 BGP neighbor.
Limit route updates or change the attributes of
route updates from the IPv6 BGP neighbor
according to the specified route map. You must
create the route-map before it can be selected
here.
Limit route updates or change the attributes of
route updates to the IPv6 BGP neighbor
according to the specified route map. You must
create the route-map before it can be selected
here.
This keyword is available when remote-as is
identical to the FortiGate unit AS number.
Enable or disable the operation of the FortiGate
unit as a route reflector and identify the BGP
neighbor as a route-reflector client.
Inbound routes for route reflectors can change
the next-hop, local-preference, med,
and as-path attributes of IBGP routes for
local route selection, while outbound IBGP
routes do not take into effect these attributes.
Enable or disable the recognition of the IPv6
BGP neighbor as route-server client.
Enable or disable the sending of the
COMMUNITY attribute to the IPv6 BGP
neighbor.
• To advertise extended and standard
capabilities, select both.
• To advertise extended capabilities, select
extended.
• To advertise standard capabilities, select
standard.
• To disable the advertising of the
COMMUNITY attribute, select disable.
Enable or disable the FortiGate unit to store
unmodified updates from the IPv6 BGP
neighbor to support inbound soft-
reconfiguration.
Specify the name of the route-map to selectively
unsuppress suppressed IPv6 routes. You must
create the route-map before it can be selected
here.
Enter an ID number for the entry. The number
must be an integer.
FortiGate Version 4.0 MR1 Administration Guide
Default
Null
"router
Null
"router
disable
Null
Null
disable
disable
both
disable
Null
No default.
01-410-89802-20090903
http://docs.fortinet.com/ • Feedback