Fortinet FortiGate Series Administration Manual page 632

PPTP configuration using CLI commands
632
ip-mode
{range | usrgrp}
local-ip
<address_localip>
sip <address_ipv4>
status
{disable | enable}
usrgrp <group_name>
eip <address_ipv4>
ip-mode
{range | usrgrp}
Enable to have the PPTP client retrieve the IP
address from the PPTP user group or select an IP
address from the pre-configured IP address range.
PPTP server IP address from the PPTP user group.
The starting address of the PPTP IP address range. 0.0.0.0
Enable or disable PPTP VPN.
This keyword is available when status is set to
enable.
Enter the name of the user group for authenticating
PPTP clients. The user group must be added to the
FortiGate configuration before it can be specified
here.
The ending address of the PPTP address range.
Enable to have the PPTP client retrieve the IP
address from the PPTP user group or select an IP
address from the pre-configured IP address range.
FortiGate Version 4.0 MR1 Administration Guide
PPTP VPN
disable
Null.
0.0.0.0
01-410-89802-20090903
http://docs.fortinet.com/ • Feedback