Changing Subordinate Unit Host Name And Device Priority - Fortinet FortiGate Series Administration Manual
Hide thumbs
Also See for FortiGate Series:
- Administration manual (60 pages) ,
- Install manual (51 pages) ,
- Quick start manual (14 pages)
Table of Contents
Advertisement
System Config
Changing subordinate unit host name and device priority
FortiGate Version 4.0 MR1 Administration Guide
01-410-89802-20090903
http://docs.fortinet.com/
•
Feedback
Figure 110: Example HA statistics (active-passive cluster)
Refresh every
Select to control how often the web-based manager updates the HA
statistics display.
Back to HA monitor Select to close the HA statistics list and return to the cluster members list.
Unit
The host name and serial number of the cluster unit.
Status
Indicates the status of each cluster unit. A green check mark indicates that
the cluster unit is operating normally. A red X indicates that the cluster unit
cannot communicate with the primary unit.
Up Time
The time in days, hours, minutes, and seconds since the cluster unit was last
started.
Monitor
Displays system status information for each cluster unit.
CPU Usage
The current CPU status of each cluster unit. The web-based manager
displays CPU usage for core processes only. CPU usage for management
processes (for example, for HTTPS connections to the web-based manager)
is excluded.
Memory Usage
The current memory status of each cluster unit. The web-based manager
displays memory usage for core processes only. Memory usage for
management processes (for example, for HTTPS connections to the
web-based manager) is excluded.
Active Sessions
The number of communications sessions being processed by the cluster
unit.
Total Packets
The number of packets that have been processed by the cluster unit since it
last started up.
Virus Detected
The number of viruses detected by the cluster unit.
Network Utilization
The total network bandwidth being used by all of the cluster unit interfaces.
Total Bytes
The number of bytes that have been processed by the cluster unit since it
last started up.
Intrusion Detected
The number of intrusions or attacks detected by Intrusion Protection running
on the cluster unit.
To change the host name and device priority of a subordinate unit in an operating cluster,
go to System > Config > HA to display the cluster members list. Select Edit for any slave
(subordinate) unit in the cluster members list.
HA
239
Advertisement
Table of Contents
