Fortinet FortiGate Series Administration Manual page 684

Hide thumbs Also See for FortiGate Series:

Table of Contents

Configuring WAN optimization

Figure 425: WAN optimization rule list

Add a new WAN optimization rule. New rules are added to the bottom of the list.

Select to enable a rule or deselect to disable a rule. A disabled rule is out of

The rule identifier. Rules are numbered in the order they are added to the rule

The source address or address range that the rule matches. See

optimization addresses" on page

The destination address or address range that the rule matches. See

WAN optimization addresses" on page

The destination port number or port number range that the rule matches.

Indicates whether you have selected byte caching in the WAN optimization rule.

Indicates whether the rule is an active (client) rule, a passive (server) rule or if

auto-detect is off. If auto-detect is off, the rule can be a peer-to-peer rule or a

Web Cache Only rule.

The protocol optimization WAN optimization technique applied by the rule. See

FortiGate WAN Optimization, Web Cache, and Web Proxy User

For a peer-to-peer rule, the name of the peer WAN optimizer at the other end of

Indicates whether the rule applies Full Optimization or Web Cache Only.

Indicates whether the rule is configured for SSL offloading.

Secure Tunnel

Indicates whether the rule is configured to used a WAN optimization tunnel.

Delete a rule from the list.

Edit a rule.

Add a new rule above the corresponding rule (the New rule screen appears).

Optimization

Rule Before icon

Move To icon

Move the corresponding rule before or after another rule in the list. See

a rule to a different position in the rule list" on page

WAN optimization and web caching

Insert WAN Optimization

FortiGate Version 4.0 MR1 Administration Guide

01-410-89802-20090903

http://docs.fortinet.com/