Connecting To The Fortigate Cli From The Web-Based Manager; Button Bar Features; Contacting Customer Support - Fortinet FortiGate Series Administration Manual

Web-based manager

Connecting to the FortiGate CLI from the web-based manager

Button bar features

Contacting Customer Support

FortiGate Version 4.0 MR1 Administration Guide
01-410-89802-20090903
http://docs.fortinet.com/ • Feedback
To change the web-based manager idle timeout
1 Go to System > Admin > Settings.
2 Change the Idle Timeout minutes as required.
3 Select Apply.
You can connect to the FortiGate CLI from the web-based manager dashboard by using
the CLI console widget. You can use the CLI to configure all configuration options
available from the web-based manager. Some configuration options are available only
from the CLI. As well, you can use the CLI to enter diagnose commands and perform
other advanced operations that are not available from the web-based manager. For more
information about the FortiGate CLI see the
To connect to the FortiGate CLI from the web-based manager
1 Go to System > Status.
2 Locate and select the CLI Console.
Selecting the CLI console logs you into the CLI. For more information, see
Console" on page 119.
The button bar in the upper right corner of the web-based manager provides access to
several important FortiGate features.
Figure 12: Web-based manager button bar
Contact Customer
Back up your FortiGate
configuration
The Contact Customer Support button opens the
browser window. From this page you can:
• visit the Fortinet Knowledge Center
• log into Customer Support (Support Login)
• register your Fortinet product
• view Fortinet Product End of Life
• find out about Fortinet Training and Certification
FortiGate CLI
Support
Online Help
Logout
Fortinet Support
(Product Registration)
information
Button bar features
Reference.
"CLI
web page in a new
93