Utm Features Support Ipv6 Traffic; Http Basic Authentication In Firewall Policies; Vdom Dashboard - Fortinet FortiGate Series Administration Manual

Hide thumbs Also See for FortiGate Series:

Table of Contents

UTM features support IPv6 traffic

FortiOS Version 4.0 MR1 can perform antivirus scanning on IPv6 traffic. As with IPv4

traffic, in the firewall policy you select a protection profile that includes AV scanning.

URL Filtering using FortiGuard ratings, local ratings or local categories is supported for

IPv6 traffic. Rating by IP address is not supported.

Note: IPS for IPv6 traffic is supported using DoS policy in both Transparent and

NAT/Route mode (same as 4.0).

HTTP basic authentication uses an authentication dialog box that is built into the browser

instead of an HTML form. This type of authentication is useful for mobile devices that

cannot work with HTML forms.

You can enable HTTP basic authentication at the VDOM level using a new option in the

user settings.

config user setting

set auth-http-basic {disable | enable}

In previous versions of FortiOS, only administrators with the super_admin profile could

view the dashboard. In FortiOS Version 4.0 MR1, VDOM administrators see their own

VDOM-specific dashboard when they log in or go to System > Status. The super_admin

can view only the global dashboard.

Figure 5: VDOM dashboard

What's new in FortiOS Version 4.0 MR1

FortiGate Version 4.0 MR1 Administration Guide

01-410-89802-20090903

http://docs.fortinet.com/