Configuring Recurring Schedules; Viewing The One-Time Schedule List - Fortinet FortiGate Series Administration Manual

Hide thumbs Also See for FortiGate Series:

Table of Contents

Configuring recurring schedules

Remove the schedule from the list. The Delete icon appears only if the schedule

is not being used in a firewall policy.

Edit the schedule.

To add a recurring schedule, go to Firewall > Schedule > Recurring. Complete the fields

as described in the following table and select OK.

To put a policy into effect for an entire day, set schedule start and stop times to 00.

Figure 239: New Recurring Schedule

Enter a name to identify the recurring schedule.

Select the days of the week for the schedule to be active.

Select the start time for the recurring schedule.

Select the stop time for the recurring schedule.

Tip: You can also create recurring schedules when you configure a firewall policy. Go to

Firewall > Policy, select the appropriate policy tab and then Create New. From the Schedule

list, select Recurring > Create New.

You can create a one-time schedule that activates a policy during a specified period of

time. For example, a firewall might be configured with a default policy that allows access

to all services on the Internet at all times, but you could add a one-time schedule to block

access to the Internet during a holiday.

To view the one-time schedule list, go to Firewall > Schedule > One-time.

Figure 240: One-time schedule list

Add a one-time schedule.

The name of the one-time schedule.

The start date and time for the schedule.

The stop date and time for the schedule.

FortiGate Version 4.0 MR1 Administration Guide

01-410-89802-20090903

http://docs.fortinet.com/

Firewall Schedule