Fortinet FortiGate Series Administration Manual page 116

Viewing the system dashboard
116
Figure 34: Alert Message Console
History View all alert messages.
Edit Configure Alert Message Console settings.
Refresh Update displayed information.
Close Close the module.
Acknowledge Select to remove this message.
this message The Acknowledge icon is also available for each alert message in the History
window.
The following types of messages can appear in the Alert Message Console:
System restart
System shutdown
Firmware upgraded by
<admin_name>
Firmware downgraded by
<admin_name>
FortiGate has reached connection
limit for <n> seconds
Found a new FortiAnalyzer
Lost the connection to FortiAnalyzer
New firmware is available from
FortiGuard
To configure the Alert Message Console
You can configure the alert message console settings to control what types of messages
are displayed on the console.
1 Go to System > Status > Dashboard.
2 Select the Edit icon in the Alert Message Console title bar.
3 Select the types of alerts that the Alert Message Console should display.
By default, all alert types are enabled.
History
The system restarted. The restart could be due to operator
action or power off/on cycling.
An administrator shut down the FortiGate unit from the
web-based manager or CLI.
The named administrator upgraded the firmware to a more
recent version on either the active or non-active partition.
The named administrator downgraded the firmware to an older
version on either the active or non-active partition.
The antivirus engine was low on memory for the duration of
time shown and entered conserve mode. Depending on model
and configuration, content can be blocked or can pass
unscanned under these conditions.
Shows that the FortiGate unit has either found or lost the
connection to a FortiAnalyzer unit. See
FortiAnalyzer unit" on page
An updated firmware image is available to be downloaded to
this FortiGate unit.
FortiGate Version 4.0 MR1 Administration Guide
System Status
Edit
Refresh
Close
Acknowledge this
message
"Remote logging to a
710.
01-410-89802-20090903
http://docs.fortinet.com/ • Feedback