Fortinet FortiGate Series Administration Manual page 57

Hide thumbs Also See for FortiGate Series:

Table of Contents

What's new in FortiOS Version 4.0 MR1

FortiGate Version 4.0 MR1 Administration Guide

01-410-89802-20090903

http://docs.fortinet.com/

edit <prefix_list_name>

config rule Variables

edit <prefix_rule_id>

action {deny | permit}

comments <string>

ge <length_integer>

le <length_integer>

{<address_ipv6mask> | any}

Enter a name for the prefix list. A prefix list and

an access list cannot have the same name.

Enter an entry number for the rule. The number

must be an integer.

Set the action to take for this prefix.

Enter a description of this access list entry. The

description can be up to 127 characters long.

Match prefix lengths that are greater than or

equal to this number. The setting for ge should

be less than the setting for le. The setting for

ge should be greater than the netmask set for

prefix. length_integer can be any

number from 0 to 128.

Match prefix lengths that are less than or equal

to this number. The setting for le should be

greater than the setting for ge.

length_integer can be any number from 0

Enter the prefix (IP address and netmask) for

this prefix list rule or enter any to match any

prefix. The length of the netmask should be less

than the setting for ge. If prefix is set to any, ge

and le should not be set.

Dynamic routing for IPv6 traffic