Declaration Of Incorporation For Machinery - ProMinent Sigma 3 Basic Operating Instructions Manual

23

Declaration of Incorporation for Machinery

For pumps without explosion protection:
Tab. 17: Excerpt from the Declaration of Conformity
Designation of the product:
Product type:
Serial number:
Relevant directives:
Harmonised standards applied, in
particular:
Only start up the pump when it has been established that the machine into which the pump has been installed com‐
plies with the provisions of the Machine Directive.
Date:
In accordance with DIRECTIVE 2006/42/EC OF THE EUROPEAN PAR‐
LIAMENT AND OF THE COUNCIL, Appendix I, BASIC HEALTH AND
SAFETY REQUIREMENTS, section 1.7.4.2. C.
We,
ProMinent GmbH
n
Im Schuhmachergewann 5 - 11
n
D - 69123 Heidelberg, Germany,
n
hereby declare that the product specified below complies with the relevant
basic health and safety requirements of the EC Directive on the basis of its
functional concept and design and in the version marketed by us. Tech‐
nical documents were produced in line with Appendix VII Part B.
Any modification to the product not approved by us invalidates this decla‐
ration.
Metering pump without motor, Sigma product range
S3Ba _ _ _ _ _ _ _ _ _ _ _ _ _ _ § 0_ _
with characteristics
§ = "1" or "2" or "3"
see nameplate on the unit
Machinery Directive (2006/42/EC)
Compliance with the protection targets of the Low Voltage Directive 2014/35/EU
according to Appendix I, No. 1.5.1 of the Machinery Directive 2006/42/EC
EN ISO 12100:2010
EN 809:1998 + A1:2009 + AC:2010
20.04.2016
You can download the Declaration of Conformity from www.promi‐
nent.com.
Declaration of Incorporation for Machinery
95