Declaration Of Conformity For Machinery - ProMinent Sigma 3 Basic Operating Instructions Manual

Declaration of Conformity for Machinery

22 Declaration of Conformity for Machinery
For pumps without explosion protection:
Tab. 16: Excerpt from the Declaration of Conformity
Designation of the product:
Product type:
Serial number:
Relevant directives:
Harmonised standards applied, in
particular:
Date:
94
In accordance with DIRECTIVE 2006/42/EC OF THE EUROPEAN PAR‐
LIAMENT AND OF THE COUNCIL, Appendix I, BASIC HEALTH AND
SAFETY REQUIREMENTS, section 1.7.4.2. C.
We,
ProMinent GmbH
n
Im Schuhmachergewann 5 - 11
n
D - 69123 Heidelberg, Germany,
n
hereby declare that the product specified below complies with the relevant
basic health and safety requirements of the EC Directive on the basis of its
functional concept and design and in the version marketed by us.
Any modification to the product not approved by us invalidates this decla‐
ration.
Metering pump, Sigma product range
S3Ba _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ § 0 _ _
with characteristics
§ = "M" or "N" or "R" or "S" or "T" or "V" or "Z"
see nameplate on the unit
Machinery Directive (2006/42/EC)
Compliance with the protection targets of the Low Voltage Directive 2014/35/EU
according to Appendix I, No. 1.5.1 of the Machinery Directive 2006/42/EC
EMC Directive (2014/30/EU)
EN ISO 12100:2010
EN 809:1998 + A1:2009 + AC:2010
EN 61000-6-2:2005 + AC:2005
EN 61000-6-4:2007 + AC:2011 + AC:2012
20.04.2016
You can download the Declaration of Conformity from www.promi‐
nent.com.