Declaration Of Conformity For Atex Machinery - ProMinent Sigma 3 Basic Operating Instructions Manual

Declaration of Conformity for ATEX Machinery

24 Declaration of Conformity for ATEX Machinery
For pumps with explosion protection:
Tab. 18: Excerpt from the Declaration of Conformity
Designation of the product:
Product type:
Serial number:
Relevant directives:
Harmonised standards applied, in
particular:
Ex specification of the entire
system:
Date:
96
We,
ProMinent GmbH
n
Im Schuhmachergewann 5 - 11
n
DE - 69123 Heidelberg, Germany,
n
hereby declare that the product specified below complies with the relevant
basic health and safety requirements of the Directive, on the basis of its
functional concept and design and in the version distributed by us.
Any modification to the product not approved by us invalidates this decla‐
ration.
Metering pump, Sigma product range
Design for use in areas at risk of explosion
in accordance with the ATEX Directive (2014/34/EU)
S3Ba_ _ _ _ _ _ _ _ _ _ _ _ _ _ § $ _ _
with characteristics
§ = "L" or "P" and $ = "1" or "2"
or § = "V" and "$" = "2"
see nameplate on the unit
ATEX Directive (2014/34/EC)
Machinery Directive (2006/42/EC)
Compliance with the protection targets of the Low Voltage Directive 2014/35/EU
according to Appendix I, No. 1.5.1 of the Machinery Directive
EMC Directive (2014/30/EU)
EN ISO 80079-36:2016, EN ISO 80079-37:2016
EN ISO 12100:2010, EN 809:1998 + A1:2009 + AC:2010
EN 61000-6-2:2005 + AC:2005, EN 61000-6-4:2007 + AC:2011
II 2G Ex h IIC T3 Gb X for $ = "1"
II 2G Ex h IIC T4 Gb X for $ = "2"
X*: max. media temperature 90 °C
Ambient temperature -10 °C ... +40 °C
16.11.2018
* With regard to "Special conditions" - refer also to the "Safety chapter" -
"Safety information for ATEX designs" - "Special conditions for ATEX".
You can download the Declaration of Conformity from www.promi‐
nent.com.
The Declarations of Conformity, the EC type-examination certificates and
the operating instructions for the individual components are also enclosed
with the pump.