ProMinent Sigma 3 Basic Operating Instructions Manual page 10

Diaphragm motor-driven metering pump
Table of Contents

Advertisement

Safety chapter
Qualification of personnel
10
The pump is not intended for the metering of gaseous media and
n
solids.
The pump is not intended for the metering of explosive substances
n
and mixtures.
The pump is not intended for unprotected use outdoors.
n
The pump is only intended for industrial use.
n
Only allow trained and authorised personnel to operate the pump -
n
see the following table.
You have a responsibility to adhere to the information contained in the
n
operating instructions at the different phases of the unit's service life.
You have a responsibility to observe the information contained in the
n
operating instructions for the auxiliary equipment at the different
phases of their respective service lives.
ATEX designs only: Refer to the chapter "
n
mation for ATEX designs' on page 15 ".
Task
Storage, transport, unpacking
Assembly
Planning the hydraulic installation
Hydraulic installation
Electrical installation
Start up
Operation
Maintenance, repair
Decommissioning, disposal
Troubleshooting
Explanation of the table:
Trained, qualified personnel
A trained, qualified employee is deemed to be a person who is able to
assess the tasks assigned to him and recognise possible hazards based
on his training, knowledge and experience, as well as knowledge of perti‐
nent regulations. A trained, qualified employee must be able to perform
the tasks assigned to him/her independently with the assistance of
drawing documentation and parts lists. The assessment of a person's
technical training can also be based on several years of work in the rele‐
vant field.
Electrical technician
An electrical technician is able to complete work on electrical systems and
recognise and avoid possible dangers independently based on his tech‐
nical training and experience as well as knowledge of pertinent standards
and regulations. An electrical technician must be able to perform the tasks
assigned to him/her independently with the assistance of drawing docu‐
mentation, parts lists, terminal and circuit diagrams. The electrical techni‐
cian must be specifically trained for the working environment in which the
electrical technician is employed and be conversant with the relevant
standards and regulations.
Instructed person
An instructed person is deemed to be a person who has been instructed
and, if required, trained in the tasks assigned to him/her and possible dan‐
gers that could result from improper behaviour, as well as having been
instructed in the required protective equipment and protective measures.
Ä Chapter 2.1 'Safety infor‐
Qualification
Instructed person
Technical personnel, service
Qualified personnel who have a
thorough knowledge of oscillating
diaphragm pumps
Technical personnel, service
Electrical technician
Technical personnel
Instructed person
Technical personnel, service
Technical personnel, service
Qualified person, electrical techni‐
cian, instructed person, service -
depending on the requirement

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

S3ba

Table of Contents